China 1622311033/1622311034 1092022933 1092022934 Air Compressor Gear for Atlas Copco Spare Parts helical bevel gear

Merchandise Description

1622311033/ Air Compressor Gear for CZPT Spare Areas

 

 

The bare minimum pressure valve is composed of valve physique, valve main, spring, sealing ring, altering screw, etc. It is put in at the outlet of the oil separator. Its perform is to maintain the pressure in the oil separation tank from falling underneath .4MPa. The compressed air that contains oil can be separated much better in the separator and the loss of lubricating oil can be reduced. At the exact same time, it can guarantee the gas stress required to create the oil force. The minimum force valve also capabilities as a one particular-way valve to avert the compressed air in the program from flowing back again when the system is shut down. The holding force of the minimal strain valve has been altered just before leaving the manufacturing facility. If the holding pressure adjustments thanks to a long time of use, it can be adjusted by the adjustment screw on the valve.

Attribute

  • Direct Substitute CZPT & Solution Compatibility one 1613950300 1622365200 1622365600 Atlas Copco GA75 Air filter 1619279800 Atlas Copco GA250 Air filter Atlas Copco GA220 Air filter 1627009499 Atlas Copco GA30 Air filter 1613740700 Atlas Copco GA37 Air filter 1613740800 Atlas Copco GA75 Air filter 1613800400 Atlas Copco GA55 Air filter 1613955710 Atlas Copco GA55 Air filter 1613950300 Atlas Copco GA11, GA22 Air filter 1613872000 Atlas Copco GA18 Air filter 1619126900 Atlas Copco   Air filter 157117000 Atlas Copco GA90C/one hundred ten/132/a hundred and sixty Air filter 1621054799 Atlas Copco   Air filter 1613950300 Atlas Copco   Air filter 1621510700 Atlas Copco XRHS396. XRHS366, XRVS455 Air filter 2914501700 Atlas Copco XRHS396. XRHS366, XRVS455 Air filter CF810 Atlas Copco   Air filter 1619162900 Atlas Copco   Air filter 1619284700 Atlas Copco   Air filter Atlas Copco   Air filter 1621574300 Atlas Copco XA75 Separator 1614437300 Atlas Copco   Separator 290157101 Atlas Copco GA30 Separator 162205710 Atlas Copco   Separator 2957106100 Atlas Copco XRVS10 Separator 165712880 Atlas Copco   Separator 2957100401 Atlas Copco GA11C-GA30C Separator 290157100 Atlas Copco GA22 Separator 1613755710 Atlas Copco   Separator 1622646000 Atlas Copco   Separator 2957134301 Atlas Copco   Separator 1613688002 Atlas Copco   Separator 1613692100 Atlas Copco GA250 Separator 1621938600 Atlas Copco GA18 Separator 1612386900 Atlas Copco GA45 Separator 1613839700 Atlas Copco GA45,GA30 Separator 1613688000 Atlas Copco   Separator 1613901400 Atlas Copco   Separator 1257172200 Atlas Copco GA37 Separator 1613243300 Atlas Copco   Separator 1616465602 Atlas Copco GA75 Separator 1613730600 Atlas Copco GA75,GA55 Separator 1613955900 Atlas Copco GA75VSD Separator 2957185800 Atlas Copco   Separator 290657100 Atlas Copco   Separator 2957156602 Atlas Copco GA90 Separator 1622365600 Atlas Copco GA75 Separator 1613800700 Atlas Copco GA1110 Separator 2252631300 Atlas Copco   Separator 2906056500 Atlas Copco GA110 Separator 1614905400 Atlas Copco GA200 / GA250 Separator 1614952100 Atlas Copco GA132/160 Separator 1614905600 Atlas Copco   Separator 162257100 Atlas Copco   Separator 15130 0571 Atlas Copco   Separator 1621938500 Atlas Copco GA90C Separator 1614642300 Atlas Copco   Separator 2957107800 Atlas Copco   Separator 2957177400 Atlas Copco   Separator 1614704800 Atlas Copco   Separator 162257100 Atlas Copco   Air filter 1621054700 Atlas Copco GA37 Separator 1613839702 Atlas Copco   Separator 2957153600 Atlas Copco GA90 Separator 1621938400 Atlas Copco   Separator 2957153700 Atlas Copco   Separator 162205711 Atlas Copco   Separator 1613610590 Atlas Copco   Separator 2911001700 Atlas Copco   Separator 1257141900 Atlas Copco   Separator 1621574200 Atlas Copco   Separator 2901162600 Atlas Copco GA37 Separator 1622314000 Atlas Copco GA5-GA11 Separator 2957152300 Atlas Copco   Air filter 1622185501 Atlas Copco GA132 Separator 1621938599 Atlas Copco GA75-8 Separator 1622569300 Atlas Copco   Separator 1612386901 Atlas Copco   Separator 1616465600 Atlas Copco   Separator 1257134300 Atlas Copco   Separator 1614905499 Atlas Copco   Separator 1616283600 Atlas Copco   Separator 1615594800 Atlas Copco   Separator 22526313 Atlas Copco   Separator 1613765710 Atlas Copco GA11 Oil filter 1613610500 Atlas Copco   Oil filter 1614874700 Atlas Copco   Oil filter 1625165601 Atlas Copco   Oil filter 1513033700 Atlas Copco   Oil filter 1257104090 Atlas Copco   Oil filter 1625165602 Atlas Copco GA37VSD Oil filter 1622314200 Atlas Copco GA75VSD Oil filter 1622365200 Atlas Copco GA30/37 (Aged) Separator 1202641400 Atlas Copco   Air filter 161395710 Atlas Copco GA237 Separator 1614532900 Atlas Copco   Oil filter 1257104000 Atlas Copco   Oil filter 1621875000 Atlas Copco   Oil filter 1513033701 Atlas Copco   Oil filter 1614874799 Atlas Copco   Separator 16219 0571 Atlas Copco   Separator 2957100300

     

    US $5.99-19.99
    / Piece
    |
    1 Piece

    (Min. Order)

    ###

    Customized: Customized
    Standard Component: Standard Component
    Material: Stainless Steel
    Category: Solenoid Valve
    Cooling System: Air Cooling
    Cylinder Position: Vertical

    ###

    Customization:

    ###

    Part No. Part No. Part No. Part No.
    1092200288 1621737800 1513033790 1622365200
    1202804002 1622783600 1613610500 1625752500
    1513033700 1625480000 1613610590 1625775400
    1613610500 1625752500 1614874700 2202929400
    1613737800 WD962 1622035101 16227836000
    1614727300 WD1374 1622087100 1621737800
    1614874700 1622365200 1622314200 1622314200
    1619262700 1202804002 1622314280 1622314280

    ###

    Air Compressor Models Air Filter Oil Filter Separator
    GA 55 PLUS from2005 1613950300 1622365200 1622365600
    GA 75 PLUS from 2005 1613950300 1622460100 1622365600
    GA 75 VSD 1613950300 1622365200 2901085800
    GA 90 from 2005 1613950300 1622365200 1622365600
    GA 75 VSD from 2006/07 1613950300 1622365200 1622365600
    GA 90 VSD from 2006/07 1613950300 1622460100 1622365600
    GA 90 from s/n API 610000 1613950300 1622365200 1622365600
    Atlas Copco GA75 Air filter 1619279800
    Atlas Copco GA250 Air filter 1621054600
    Atlas Copco GA220 Air filter 1627009499
    Atlas Copco GA30 Air filter 1613740700
    Atlas Copco GA37 Air filter 1613740800
    Atlas Copco GA75 Air filter 1613800400
    Atlas Copco GA55 Air filter 1613950100
    Atlas Copco GA55 Air filter 1613950300
    Atlas Copco GA11, GA22 Air filter 1613872000
    Atlas Copco GA18 Air filter 1619126900
    Atlas Copco   Air filter 1030107000
    Atlas Copco GA90C/110/132/160 Air filter 1621054799
    Atlas Copco   Air filter 1613950300
    Atlas Copco   Air filter 1621510700
    Atlas Copco XRHS396. XRHS366, XRVS455 Air filter 2914501700
    Atlas Copco XRHS396. XRHS366, XRVS455 Air filter CF810
    Atlas Copco   Air filter 1619162900
    Atlas Copco   Air filter 1619284700
    Atlas Copco   Air filter 1621054600
    Atlas Copco   Air filter 1621574300
    Atlas Copco XA75 Separator 1614437300
    Atlas Copco   Separator 2901077901
    Atlas Copco GA30 Separator 1622007900
    Atlas Copco   Separator 2901006100
    Atlas Copco XRVS10 Separator 1604132880
    Atlas Copco   Separator 2901000401
    Atlas Copco GA11C-GA30C Separator 2901077900
    Atlas Copco GA22 Separator 1613750200
    Atlas Copco   Separator 1622646000
    Atlas Copco   Separator 2901034301
    Atlas Copco   Separator 1613688002
    Atlas Copco   Separator 1613692100
    Atlas Copco GA250 Separator 1621938600
    Atlas Copco GA18 Separator 1612386900
    Atlas Copco GA45 Separator 1613839700
    Atlas Copco GA45,GA30 Separator 1613688000
    Atlas Copco   Separator 1613901400
    Atlas Copco   Separator 1202872200
    Atlas Copco GA37 Separator 1613243300
    Atlas Copco   Separator 1616465602
    Atlas Copco GA75 Separator 1613730600
    Atlas Copco GA75,GA55 Separator 1613955900
    Atlas Copco GA75VSD Separator 2901085800
    Atlas Copco   Separator 2906075200
    Atlas Copco   Separator 2901056602
    Atlas Copco GA90 Separator 1622365600
    Atlas Copco GA75 Separator 1613800700
    Atlas Copco GA1110 Separator 2252631300
    Atlas Copco   Separator 2906056500
    Atlas Copco GA110 Separator 1614905400
    Atlas Copco GA200 / GA250 Separator 1614952100
    Atlas Copco GA132/160 Separator 1614905600
    Atlas Copco   Separator 1622051600
    Atlas Copco   Separator 1513005800
    Atlas Copco   Separator 1621938500
    Atlas Copco GA90C Separator 1614642300
    Atlas Copco   Separator 2901007800
    Atlas Copco   Separator 2901077400
    Atlas Copco   Separator 1614704800
    Atlas Copco   Separator 1622087100
    Atlas Copco   Air filter 1621054700
    Atlas Copco GA37 Separator 1613839702
    Atlas Copco   Separator 2901053600
    Atlas Copco GA90 Separator 1621938400
    Atlas Copco   Separator 2901053700
    Atlas Copco   Separator 1622007901
    Atlas Copco   Separator 1613610590
    Atlas Copco   Separator 2911001700
    Atlas Copco   Separator 1202741900
    Atlas Copco   Separator 1621574200
    Atlas Copco   Separator 2901162600
    Atlas Copco GA37 Separator 1622314000
    Atlas Copco GA5-GA11 Separator 2901052300
    Atlas Copco   Air filter 1622185501
    Atlas Copco GA132 Separator 1621938599
    Atlas Copco GA75-8 Separator 1622569300
    Atlas Copco   Separator 1612386901
    Atlas Copco   Separator 1616465600
    Atlas Copco   Separator 1202834300
    Atlas Copco   Separator 1614905499
    Atlas Copco   Separator 1616283600
    Atlas Copco   Separator 1615594800
    Atlas Copco   Separator 22526313
    Atlas Copco   Separator 1613760200
    Atlas Copco GA11 Oil filter 1613610500
    Atlas Copco   Oil filter 1614874700
    Atlas Copco   Oil filter 1625165601
    Atlas Copco   Oil filter 1513033700
    Atlas Copco   Oil filter 1202804090
    Atlas Copco   Oil filter 1625165602
    Atlas Copco GA37VSD Oil filter 1622314200
    Atlas Copco GA75VSD Oil filter 1622365200
    Atlas Copco GA30/37 (OLD) Separator 1202641400
    Atlas Copco   Air filter 1613900100
    Atlas Copco GA237 Separator 1614532900
    Atlas Copco   Oil filter 1202804000
    Atlas Copco   Oil filter 1621875000
    Atlas Copco   Oil filter 1513033701
    Atlas Copco   Oil filter 1614874799
    Atlas Copco   Separator 1621907700
    Atlas Copco   Separator 2901000300
    US $5.99-19.99
    / Piece
    |
    1 Piece

    (Min. Order)

    ###

    Customized: Customized
    Standard Component: Standard Component
    Material: Stainless Steel
    Category: Solenoid Valve
    Cooling System: Air Cooling
    Cylinder Position: Vertical

    ###

    Customization:

    ###

    Part No. Part No. Part No. Part No.
    1092200288 1621737800 1513033790 1622365200
    1202804002 1622783600 1613610500 1625752500
    1513033700 1625480000 1613610590 1625775400
    1613610500 1625752500 1614874700 2202929400
    1613737800 WD962 1622035101 16227836000
    1614727300 WD1374 1622087100 1621737800
    1614874700 1622365200 1622314200 1622314200
    1619262700 1202804002 1622314280 1622314280

    ###

    Air Compressor Models Air Filter Oil Filter Separator
    GA 55 PLUS from2005 1613950300 1622365200 1622365600
    GA 75 PLUS from 2005 1613950300 1622460100 1622365600
    GA 75 VSD 1613950300 1622365200 2901085800
    GA 90 from 2005 1613950300 1622365200 1622365600
    GA 75 VSD from 2006/07 1613950300 1622365200 1622365600
    GA 90 VSD from 2006/07 1613950300 1622460100 1622365600
    GA 90 from s/n API 610000 1613950300 1622365200 1622365600
    Atlas Copco GA75 Air filter 1619279800
    Atlas Copco GA250 Air filter 1621054600
    Atlas Copco GA220 Air filter 1627009499
    Atlas Copco GA30 Air filter 1613740700
    Atlas Copco GA37 Air filter 1613740800
    Atlas Copco GA75 Air filter 1613800400
    Atlas Copco GA55 Air filter 1613950100
    Atlas Copco GA55 Air filter 1613950300
    Atlas Copco GA11, GA22 Air filter 1613872000
    Atlas Copco GA18 Air filter 1619126900
    Atlas Copco   Air filter 1030107000
    Atlas Copco GA90C/110/132/160 Air filter 1621054799
    Atlas Copco   Air filter 1613950300
    Atlas Copco   Air filter 1621510700
    Atlas Copco XRHS396. XRHS366, XRVS455 Air filter 2914501700
    Atlas Copco XRHS396. XRHS366, XRVS455 Air filter CF810
    Atlas Copco   Air filter 1619162900
    Atlas Copco   Air filter 1619284700
    Atlas Copco   Air filter 1621054600
    Atlas Copco   Air filter 1621574300
    Atlas Copco XA75 Separator 1614437300
    Atlas Copco   Separator 2901077901
    Atlas Copco GA30 Separator 1622007900
    Atlas Copco   Separator 2901006100
    Atlas Copco XRVS10 Separator 1604132880
    Atlas Copco   Separator 2901000401
    Atlas Copco GA11C-GA30C Separator 2901077900
    Atlas Copco GA22 Separator 1613750200
    Atlas Copco   Separator 1622646000
    Atlas Copco   Separator 2901034301
    Atlas Copco   Separator 1613688002
    Atlas Copco   Separator 1613692100
    Atlas Copco GA250 Separator 1621938600
    Atlas Copco GA18 Separator 1612386900
    Atlas Copco GA45 Separator 1613839700
    Atlas Copco GA45,GA30 Separator 1613688000
    Atlas Copco   Separator 1613901400
    Atlas Copco   Separator 1202872200
    Atlas Copco GA37 Separator 1613243300
    Atlas Copco   Separator 1616465602
    Atlas Copco GA75 Separator 1613730600
    Atlas Copco GA75,GA55 Separator 1613955900
    Atlas Copco GA75VSD Separator 2901085800
    Atlas Copco   Separator 2906075200
    Atlas Copco   Separator 2901056602
    Atlas Copco GA90 Separator 1622365600
    Atlas Copco GA75 Separator 1613800700
    Atlas Copco GA1110 Separator 2252631300
    Atlas Copco   Separator 2906056500
    Atlas Copco GA110 Separator 1614905400
    Atlas Copco GA200 / GA250 Separator 1614952100
    Atlas Copco GA132/160 Separator 1614905600
    Atlas Copco   Separator 1622051600
    Atlas Copco   Separator 1513005800
    Atlas Copco   Separator 1621938500
    Atlas Copco GA90C Separator 1614642300
    Atlas Copco   Separator 2901007800
    Atlas Copco   Separator 2901077400
    Atlas Copco   Separator 1614704800
    Atlas Copco   Separator 1622087100
    Atlas Copco   Air filter 1621054700
    Atlas Copco GA37 Separator 1613839702
    Atlas Copco   Separator 2901053600
    Atlas Copco GA90 Separator 1621938400
    Atlas Copco   Separator 2901053700
    Atlas Copco   Separator 1622007901
    Atlas Copco   Separator 1613610590
    Atlas Copco   Separator 2911001700
    Atlas Copco   Separator 1202741900
    Atlas Copco   Separator 1621574200
    Atlas Copco   Separator 2901162600
    Atlas Copco GA37 Separator 1622314000
    Atlas Copco GA5-GA11 Separator 2901052300
    Atlas Copco   Air filter 1622185501
    Atlas Copco GA132 Separator 1621938599
    Atlas Copco GA75-8 Separator 1622569300
    Atlas Copco   Separator 1612386901
    Atlas Copco   Separator 1616465600
    Atlas Copco   Separator 1202834300
    Atlas Copco   Separator 1614905499
    Atlas Copco   Separator 1616283600
    Atlas Copco   Separator 1615594800
    Atlas Copco   Separator 22526313
    Atlas Copco   Separator 1613760200
    Atlas Copco GA11 Oil filter 1613610500
    Atlas Copco   Oil filter 1614874700
    Atlas Copco   Oil filter 1625165601
    Atlas Copco   Oil filter 1513033700
    Atlas Copco   Oil filter 1202804090
    Atlas Copco   Oil filter 1625165602
    Atlas Copco GA37VSD Oil filter 1622314200
    Atlas Copco GA75VSD Oil filter 1622365200
    Atlas Copco GA30/37 (OLD) Separator 1202641400
    Atlas Copco   Air filter 1613900100
    Atlas Copco GA237 Separator 1614532900
    Atlas Copco   Oil filter 1202804000
    Atlas Copco   Oil filter 1621875000
    Atlas Copco   Oil filter 1513033701
    Atlas Copco   Oil filter 1614874799
    Atlas Copco   Separator 1621907700
    Atlas Copco   Separator 2901000300

    How to Design a Forging Spur Gear

    Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
    Gear

    Forging spur gears

    Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
    The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
    A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

    Set screw spur gears

    A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
    Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
    Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
    Gear

    Keyway spur gears

    In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
    Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
    Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

    Spline spur gears

    When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
    The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
    Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
    SUS303 and SUS304 stainless steel spur gears

    Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
    The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
    Gear

    Stainless steel spur gears

    There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
    A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
    Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

    China 1622311033/1622311034 1092022933 1092022934 Air Compressor Gear for Atlas Copco Spare Parts     helical bevel gearChina 1622311033/1622311034 1092022933 1092022934 Air Compressor Gear for Atlas Copco Spare Parts     helical bevel gear
    editor by czh 2023-01-03